|
|
 |
| POLYIMILEX |
 |
| | POLYIMILEX-PSX | POLYIMILEX-PAS | POLYIMILEX-PML | |
|
Polyimilex is maleimide-copolymer that has been debeloped by using maleimide (Imilex-P) which was first commercialized by Nippon Shokubai.
Polyimilex is non-toxic and effective in enhancing heat resistance by compounding Polyimilex with various thermoplastic resins. Polyimilex is expected to be used for developing new applications as raw material for new polymer alloys.
Polyimilex contains very low impurities because of using purified maleimide by distillation, as raw material. |
1. Appearance |
 |
| Pale yellow pellets |
2. Advantage |
|
1.Effective in enhancing heat resistance of thermoplastic resins
2.Good compatibility with various thermoplastic resins
3.Non-toxic and easy to handle
4.Good heat stability |
| Grade |
PSX0371 |
PAS1460 |
PML203 |
| Monomers |
N-Phenylmaleimide, Styrene |
N-Phenylmaleimide, Styrene, Acrylonitrile |
N-Phenylmaleimide, Methymethacrylate,Styrene |
| Compatible Polymers |
SAN resin |
SAN resin |
SAN, PMMA, MS, PVC resins |
| Applications |
Super High heat ABS, Polymer Alloys |
High Heat ABS |
High Heat ABS (Transparent) |
4.Typical Properties of Polyimilex |
| Test Item |
Test method and conditions |
Unit |
Typical Result |
| PSX0371 |
PAS1460 |
PML203 |
| Specific Gravity |
ASTM D792 |
-- |
1.19 |
1.16 |
1.20 |
| Glass Transition Temp. |
ASTM D3418 |
ºC |
202 |
167 |
140 |
| Weight Average Molecular Weight |
ASTM D3536, PS Standard |
×104 |
13 |
17 |
20 |
| Heat Deflection Temp. |
ASTM D648, 18.6kg load, not annealed, 1/4" |
ºC |
174 |
144 |
125 |
| Izod Impact Strength |
ASTM D256, Notched, 1/4", 23ºC |
KJ/m |
1.1 |
1.2 |
1.4 |
| Melt Flow Rate |
ASTM D1238, 10kg load |
g/10min |
2.6
(265ºC) |
22
(265ºC) |
5.8
(240ºC) |
| Refractive Index |
ASTM D542 |
-- |
1.60 |
1.59 |
1.52 |
Above-mentioned information is offered in good faith, but without guarantee.
| Please read Material Safety Data Sheet (MSDS) before handling. |
|
