Synthetic Polymer Wax (Solid Type): ST100 Synthetic Polymer Wax

Basic Information

ST100 is an acrylic polymer developed using Nippon Shokubai’s proprietary polymerization technology. In addition to the general properties of wax, ST100 is a solid, white polymer, with a high molecular weight and the features listed below.
ST100 has an extremely high molecular weight compared to general waxes. It has sharp thermal fusion properties and is highly soluble in aromatic and aliphatic solvents.

Features

ItemMeasured ValueMeasurement Conditions
Appearance
Specific Gravity
Linear Expansion Coefficient
Penetration
Softening Point
TMA (°C)
DSC (°C)
Melting Latent Heat (J/g)
Melt Viscosity (mPa·s)
Thermal Decomposition Temperature (℃)
White solid
0.968
1.90×10-4
3

50
46
101
1000
370

25℃

JIS K-2235 (Load: 100 g × 5 sec)

Load: 10 kg/cm2, Temperature rise: 5°C/min
Temperature rise: 10°C/min
DSC (10°C/min)
B-type viscometer ,30rpm,100℃
Thermogravimetric measurement, in N2, Temperature rise: 10°C/min
*The values listed in the table are not standard values.

Features and Properties

  • Extremely high solubility in aliphatic and/or aromatic solvents
  • Excellent rub resistance and no sticky sensation at temperatures not exceeding the melting point
  • Sharp melting behavior despite its high molecular weight
  • Nonvolatile, colorless, and transparent liquid at fusion (melt) time