Modified Polyethyleneimine Polyethyleneimine (PEI)

  • Main Applications

    Laminate anchor coating agents for paper, cloth, OPP and PET film, Heavy metal chelating agents, Metal plating additives, Foam retainers for fire extinguishers, Immobilized enzymes, Adhesives (for PVC sol flocculants, Epoxy resin crosslinkers), Ink adhesion enhancer, Water treatment (as coagulants)

Basic Information

1) Octadecyl isocyanate modified polyethyleneimine

RP-20 is the modified polyethyleneimine reacted with octadecyl isocyanate. RP-20 has two functionalities: being in the hydrophilic amino group, and being lipophilic (hydrophobic: C18).By using these functions, RP-20 shows an exceptional effect as a rear-side release agent of pressure-sensitive adhesive tape which base materials are polyester, polyethylene, polypropylene, cellophane, and paper, etc.

Item NumberRP-20
SpecificationsAppearance Slightly yellow powder
Melting Point (°C)87.0 – 95.0
Toluene Solubility (10°C) No turbidity
Loss on Drying (wt%)2.0 max.
PropertiesRecommended Diluent SolventToluene
SolubilitySoluble in toluene and xylene, Insoluble in water and alcohol
SafetyAcute Oral Toxicity LD50 (mg/kg) (Rat)>2000
Skin Irritation (Rabbit)None
MutagenicityNegative
Dust ExplosibilityYes (Explosion lower limit concentration: 40 g/m3)
CAS No.68441-25-8

2) Propylene oxide (PO) modified polyethyleneimine

PP-061 is the addition product of polyethyleneimine with propylene oxide,
it is the tertiary polyamine.

Chemical structure
Item NumberPP-061
SpecificationsAppearance Transparent liquid
Active Components (wt%) 48.0 – 52.0
Viscosity (mPa·s at 25°C) 200 max.
pH (5%aq.)10.0 – 12.0
PropertiesOH Value (mmol/g-solid) 9.9
Amine Value (mmol/g-solid)9.9
Molecular Weight (Mn)Approx. 1,400
Mole Ratio (OH/N)1.0
Specific Gravity (20°C)1.08
Amine Ratio (%)All tertiary amines
SolubilityDissolves in water and alcohol
CAS No.Not registered

Catalog